华秀塑胶为您提供详细的Lexan PC 3413R物性表参数。
想了解更多的与Lexan PC 3413R相关的物性参数，请点击 LEXAN™ PC产品列表。
如果您对我们的Lexan PC 3413R有任何疑问，或者想索取Lexan PC 3413R 物性表datasheet、物质安全资料证书MSDS、ROHS检验报告、SGS报告、REACH环保证明、FDA证明、EU法规证明、UL证书及出厂证明COC/COA报告等，敬请拨打我们的服务热线 020-82582555，或者点击 联系我们 给我们留言。
Lexan PC 3413R Physical property
| General Information | ||||
| Product Description | ||||
|
30% GR, 改良的机械性能， UL94 V-1 － 0.058"。内含脱模剂 | ||||
| General | ||||
| Material Status |
| |||
| Availability |
| |||
| Additive |
| |||
| Features |
| |||
| Uses |
| |||
| Agency Ratings |
| |||
| Forms |
| |||
| Processing Method |
| |||
| ASTM and ISO Properties 1 | |||
| Physical |
Nominal Value |
Unit |
Test Method |
| Specific Gravity |
1.19 |
|
ASTM D792 |
| Density |
1.19 |
g/cm3 |
ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) |
11 |
g/10 min |
ASTM D1238 |
| Melt Volume-Flow Rate (MVR) (300°C/1.2 kg) |
0.610 |
in3/10min |
ISO 1133 |
| Molding Shrinkage - Flow |
|
ASTM D955 | |
|
-- |
0.0050 to 0.0070 |
in/in |
|
|
0.126 in |
0.0050 to 0.0070 |
in/in |
|
| Molding Shrinkage - Across Flow (0.126 in) |
0.0050 to 0.0070 |
in/in |
ASTM D955 |
| Water Absorption (24 hr) |
0.14 |
% |
ASTM D570 |
| Water Absorption (Saturation, 73°F) |
0.26 |
% |
ISO 62 |
| Water Absorption (Equilibrium, 73°F, 50% RH) |
0.10 |
% |
ISO 62 |
| Mechanical |
Nominal Value |
Unit |
Test Method |
| Tensile Modulus 2 |
334000 |
psi |
ASTM D638 |
| Tensile Modulus |
347000 |
psi |
ISO 527-2/1 |
| Tensile Strength 3 (Yield) |
8990 |
psi |
ASTM D638 |
| Tensile Stress (Yield) |
8850 |
psi |
ISO 527-2/50 |
| Tensile Strength 3 (Break) |
10700 |
psi |
ASTM D638 |
| Tensile Stress (Break) |
10600 |
psi |
ISO 527-2/50 |
| Tensile Elongation 3 (Yield) |
6.5 |
% |
ASTM D638 |
| Tensile Strain (Yield) |
6.0 |
% |
ISO 527-2/50 |
| Tensile Elongation 3 (Break) |
140 |
% |
ASTM D638 |
| Tensile Strain (Break) |
130 |
% |
ISO 527-2/50 |
| Flexural Modulus 4 (1.97 in Span) |
348000 |
psi |
ASTM D790 |
| Flexural Modulus 5 |
326000 |
psi |
ISO 178 |
| Flexural Strength 5, 6 |
13500 |
psi |
ISO 178 |
| Flexural Strength 4 (Yield, 1.97 in Span) |
14500 |
psi |
ASTM D790 |
| Impact |
Nominal Value |
Unit |
Test Method |
| Charpy Notched Impact Strength |
|
||
|
73°F |
39.0 |
ft·lb/in2 |
ISO 179/2C |
|
73°F 7 |
33.3 |
ft·lb/in2 |
ISO 179/1eA |
|
-22°F 7 |
7.14 |
ft·lb/in2 |
ISO 179/1eA |
| Charpy Unnotched Impact Strength 7 |
|
ISO 179/1eU | |
|
-22°F |
No Break |
|
|
|
73°F |
No Break |
|
|
| Notched Izod Impact |
|
ASTM D256 | |
|
-22°F |
4.12 |
ft·lb/in |
|
|
73°F |
15.7 |
ft·lb/in |
|
| Notched Izod Impact Strength 8 |
|
ISO 180/1A | |
|
73°F |
33.3 |
ft·lb/in2 |
|
|
-22°F |
4.76 |
ft·lb/in2 |
|
| Unnotched Izod Impact Strength 8 |
|
ISO 180/1U | |
|
-22°F |
No Break |
|
|
|
73°F |
No Break |
|
|
| Instrumented Dart Impact (73°F, Total Energy) |
779 |
in·lb |
ASTM D3763 |
| Thermal |
Nominal Value |
Unit |
Test Method |
| Deflection Temperature Under Load (66 psi, Unannealed, 0.252 in) |
280 |
°F |
ASTM D648 |
| Deflection Temperature Under Load |
|
ASTM D648 | |
|
264 psi, Unannealed,
0.252 in |
270 |
°F |
|
|
264 psi, Unannealed,
0.126 in |
259 |
°F |
|
| Heat Deflection Temperature 9 (264 psi, Unannealed, 3.94 in Span) |
261 |
°F |
ISO 75-2/Ae |
| Vicat Softening Temperature |
289 |
°F |
ASTM D1525 10 |
| Vicat Softening Temperature |
|
||
|
-- |
289 |
°F |
ISO 306/B50 |
|
-- |
293 |
°F |
ISO 306/B120 |
| CLTE - Flow (-40 to 104°F) |
0.000043 |
in/in/°F |
ASTM E831 |
| CLTE - Flow (-40 to 104°F) |
0.000043 |
in/in/°F |
ISO 11359-2 |
| CLTE - Transverse (-40 to 104°F) |
0.000042 |
in/in/°F |
ASTM E831 |
| CLTE - Transverse (-40 to 104°F) |
0.000042 |
in/in/°F |
ISO 11359-2 |
| Ball Pressure Test (257°F) |
Pass |
|
IEC 60695-10-2 |
| Processing Information | |||
| Injection |
Nominal Value |
Unit |
|
| Drying Temperature |
248 |
°F |
|
| Drying Time |
2.0 to 4.0 |
hr |
|
| Suggested Max Moisture |
0.020 |
% |
|
| Hopper Temperature |
140 to 176 |
°F |
|
| Rear Temperature |
500 to 536 |
°F |
|
| Middle Temperature |
518 to 554 |
°F |
|
| Front Temperature |
536 to 590 |
°F |
|
| Nozzle Temperature |
518 to 554 |
°F |
|
| Processing (Melt) Temp |
536 to 590 |
°F |
|
| Mold Temperature |
176 to 230 |
°F |
|
- Physical properties of related products: LF1520A 503R 500R SP7602 500ECR 3412R SP7604 3414R BFL2010 BFL2015 3412ECR 500 503
Correlation search: 3413R-131 3413R-739 3413R-BK1066 3413R-NA Lexan 3413R 3413R物性 Sabic 3413R GE 3413R PC 3413R GE PC 聚碳酸酯 聚碳酸酯PC Sabic PC
广州华秀塑胶有限公司不仅是专业的Lexan PC 3413R原料供应商，亦注重技术支持及全方位的解决方案，提供从材料鉴定、模具设计、成型加工等系列帮助，亦可为客户量身定制各特殊性能之Lexan PC 3413R材料，进而协助客户提高产品竟争力。
地址:广州市天河区中山大道中439号东圃天银商贸大厦1720-1723室
电话:020-82582555
传真:020-82523699
Email: sales@va-so.cn
Lexan PC 3413R报价 >>
常规产品
长纤增强尼龙6 长纤增强PP
长纤增强复合材料 冲击改性复合尼龙66
冲击改性复合尼龙6 高强尼龙
冲击改性复合尼龙 冲击改性复合材料
改性PP 改性的合金料
高温改性塑料 含氟聚合物
改性POM 改性PBT
改性PC 焊接用复合塑料
高比重复合塑料 永久防静电塑料
永久防静电ABS 永久防静电合金
永久防静电POM 其他导电材料
导电尼龙 导电PE,导电PP
高温导电塑料 导电POM
导电PBT 导电PC
其他非PTFE自润滑塑料 非PTFE自润滑PA
非PTFE自润滑聚苯醚 非PTFE自润滑PPA
非PTFE自润滑聚甲醛 非PTFE自润滑聚碳酸酯
其他润滑塑料 润滑尼龙
润滑烯烃 润滑PPO(PPE+PS)
耐热润滑塑料 润滑POM
润滑PBT 润滑弹性体
润滑PC 挤出PBT
热传导复合塑料 其他PC
EMI/RFI屏蔽复合塑料 预着色非填充树脂
热门工程塑胶原料
VW300 GTX820 DFL34H DF004RXP IF007 UCL36S FN150X MX10301C DD0009E M3000C PF008QS MX99432 AX11421 ML6143H UF009S NORYL™ PPO LEXAN™ PC VALOX™ PBT ULTEM™ PEI CYCOLOY™ PC/ABS XYLEX™ PC/PET XENOY™ PC/PBT/PET Noryl GTX PPE/PA CYCOLAC™ ABS GELOY™ ASA Colorcomp Faradex Konduit Lubricomp Lubriloy Stat-kon Stat-loy Thermocomp Thermotuf Verton